Capacity List
 One
Daewoo Puma 350B C.N.C. Turning Centre with Fanuc control.
Turning capacity 700 dia x 1200 between centres.
One Cincinnati Falcon 200 Turning Centre with ACRAMATIC 2100
and C.A.M. facility.
Barfeed 65mm dia. and turning capacity of 200 dia x 400 between
centres.
One Colchester Tornado 300 C.N.C. Turning Centre with Fanuc
series O-T control.
Turning capacity 300 dia x 620 between centres.
One Daewoo Puma 250MS C.N.C Turning Centre with Fanuc control.
Turning Capacity 200 x 400 between centres.
With Sub Spindle And Live Tooling In Both Horizontal And Vertical
Axis
 One
D.S.G. Centre Lathe Type 13/1 330mm x 760mm.
One Colchester Triumph 2000.
One Colchester Mastif 1400 with digital read out.
One Colchester Mascot with 2150 bed and taper turning, With
digital Readout
One Herbet No 5 Capstan Pre Op With Full Range Of Roller
Boxes
Die Heads Etc
One Herbet No 2 Capstan With Full Range Of Tooling And Collets
The Milling Section is made up of C.N.C. Vertical, Horizontal
and Turret Milling Machines, 9 machines in total. These machines
are equipped to offer dividing head, round table and helix
milling. The Bridgeport Turret machines are fitted with optical
and digital read out equipment.
C.N.C. Milling
One Cincinnati-Milacron Arrow 750 CNC Vertical machining
centres with 4th axis interface and ACRAMATIC 2100 control.
|
Axis500mm Z
|
500mmY Axis
|
750mmX Axis
|
One Cincinnati-Milacron Arrow 500 CNC Vertical machining
centre with 4th axis and ACRAMATIC 2100 control.
|
Axis500mm Z
|
500mmY Axis
|
500mmX Axis
|
One Cincinnati-Milacron Arrow 500 CNC Vertical machining centre
with 4th axis and ACRAMATIC 2100 control.
|
Axis500mm Z
|
500mmY Axis
|
500mmX Axis
|
One Cincinnati-Milacron Lancer 1500 CNC Vertical machining
centre with 4th axis and ACRAMATIC 2100 control.
New for 2001
|
750mm Z Axis
|
750mmY Axis
|
1500mmX Axis
|
One KTM Horizontal Machine Centre With Twin Pallets And 40
Tool Carousel
With Windows Based Control
Turret Machines
Two Bridgeport Turret machines with D.R.O.
One Cincinnati Turret Milling machine
Back to Top
 |
|
HORIZONTAL
/ VERTICAL BORING |
|
|
|
 One
Herbert-Devlieg Jig Miller Model 3H72.
With digital read out 1220mm x 1850mm capacity.
One Herbert-Devlieg Jig Miller Model 3H48.
With digital read out 920mm x 1220mm capacity.
One Stanko Horizontal Borer Model 2620.
With digital read out 1250mm cube capacity.
One Richards Twin Column Vertical Borer.
With 1600 dia x 1200 height under bridge capacity.
|
This Section comprises of FIVE machines offering :-
|
SHAPING up to 760mm
PLANING up to 1850mm
SLOTTING up to 250mm Stroke
|
Our Grinding capacity covers both circular and flat work,
on a production and one off basis.
One of our Jones & Shipman Surface Grinding Machines is
fitted with an OPTIDRESS
Profile Dressing Attachment.
|
One
|
Jones & Shipman 540 Surface Grinder with
Optical Dressing Attachment
|
|
One
|
Jones & Shipman 540L Surface Grinder
|
|
One
|
Jones & Shipman 1400 Surface Grinder
|
|
One
|
Jones & Shipman No 1300 Universal Grinder
|
|
One
|
Jones & Shipman No 1049 Production External Grinder
|
|
One
|
Heald 72A Production Internal Grinder
|
|
One
|
Myford External Grinder
|
External, Internal and Surface Lapping Equipment are also
incorporated in the Honing
Section.
|
One
|
Delapena Autospeed Honing Machine 1-52mm diameter capacity.
|
|
One
|
Delapena Honing Machine 50-300mm diameter capacity
|
Back to Top
|
One
|
Christen Chamfer Grinder
|
|
One
|
Grafton Bench Drilling Machine
|
|
One
|
Herbert 4 Spindle Drilling Machine
|
|
One
|
Herbert Single Spindle Drilling Machine
|
|
One
|
Archdale 970mm Arm Radial Drilling Machine
|
|
One
|
Archdale 1220mm Arm Radial Drilling Machine
|
 As
a further service to our Customers, the Fitting Department
undertakes the Assembly
Of jigs, fixtures and special purpose machines and Sub-Assemblies.
All Components
Are cleaned and dressed prior to assembly and/or inspection
by our skilled personnel.
Assemblies are tested to Contract requirements be it Hydraulic
Cylinders or Diesel Fuel Injection Units.
 NUNEATON
PRECISIONS LIMITED provides a Fabricating sheet metal working,
welding and brazing service with welders qualified to BS EN
287/288, ASME IX, AWS D1.1 and ASW D1.3 in carbon stainless
steels; we also offer the facility to fabricate and weld aluminium,
brass and bronze.
WELDING
|
One
|
MAXARC 400A MIG welder
|
|
One
|
LINCOLN FCR 300A MIG WELDER
|
|
One
|
MAXARC 200A MIG WELDER
|
|
Two
|
FRONIUS TRANSARC 500A SYNERGIC MIG WELDER
|
|
One
|
MILLER DIALARC AC/DC water-cooled 320A TIG WELDER
|
|
One
|
LINCOLN SQUARE WAVE model 255A water-cooled AC/DC TIG
WELDER
|
Back to Top
FABRICATION PLANT LIST CAPACITY
|
SHEARING
|
3000mm x 6.5mm Plate
|
|
FOLDING
|
200mm x 4mm Plate
|
|
PRESS BRAKE
|
2500mm x 6mm Plate
|
|
ROLLING
|
1500mm x 3mm Sheet
|
|
PROFILE CUTTING
|
to 50mm thick
|
|
MOBILE PLASMA
|
to 3mm thick
|
|
FLY PRESS
|
12" dia DISC CUTTER
|
|
WELDING MANIPULATOR
|
|
|
PILLAR DRILL
|
|
| |
 |
Back to Top
|
